Buy 1 Get 1 at EXTRA 15% Store Wide - No Promo Needed

Elegoo Neptune 3 (PRO) PLUS / MAX - Always Perfect First Layer 16-Point Auto Leveling Touch screen PEI

$161.99 Regular price $259.99
Type: 3D Printers
Model
Inspection-Grade

The major difference between Neptune 3 (non-pro) and PRO version is below:
A. Neptune 3 PRO uses Sprite Direct Drive hotend that is soft material (TPU) friendly. It prints filament as soft as 70A (at 15mm/s) with perfection.
B. Neptune 3 PRO is slightly bigger in printing size by 5 mm more (at 225 mm) with an LED light bar under the gantry rail.

Same day pick-up available or fast shipping from Las Vegas Nevada 89103
*Neptune 2 (discontinued) Series available with us too at CLEARANCE PRICE - this link

This listing is a DIY 3D printer that requires assembly, calibration, modifications & dedication. It’s great only for who love to do homework, research and learn on YouTube as well as on users communities. Please only buy this model if you ENJOY this process. 

Open-box Grade A+ -> The item is in like new, never used/assembled condition. It's returned due to buyers' remorse or fulfillment error. It may only show sign of repackaging due to our inspection service (opening the box, taking photos, recording serial #, classifying grades). It's sealed, packaged in the original factory condition with ALL original factory parts/accessories in inspected new or like new condition.

Good Used Condition -> backed with 30-day warranty by our store - you will have a FULLY FUNCTIONAL UNIT OR YOU GET FREE REPLACEMENT (parts/units). It was inspected, cleaned, repaired to full working order and is in overall good pre-owned condition. It WILL contain aesthetic signs of wear/teas/scratches. This item may be repackaged.
*REMINDER: this is a used unit. NOT REFURBISHED

Damaged as Parts Only (fix-up DIY projects) ->  Most units in this grade have 1 or more major defects. They may be missing partial parts, accessories, hardware, even though they appear to be intact.

  • Please leave a note with your order if you are looking for a donor unit for specific parts. We will pick one from the lot that serves your needs, or pick one that you know how to fix (notes are apprecaited).
  • If your order is for two units or more, we will automatically pair the defects so that you can use one to fix the other one and make one fully functional unit. Our store warranty is that customers will make one fully functional unit for every two units purchased, or you will get free replacement parts for your fix-up projects.

Most commonly seen damage on FDM units (might contain one or ALL):
A. wobbly/deformed X cartridge/Y plate/Z lead screws
B. Not homing properly/limit switch error/stepper motor wiring
C. bad thermistor(re-wiring/replacing required) jammed/clogged hotend
D. Bad board, firmware issues, not power on etc.

Neptune 3 Pro/Plus/Max models share the same following components if the intention is sourcing parts for fixup:
- monitor/controller
- mainboard (reflashing firmware required)
- hotend assembly

* the components of Neptune 3 is not compatible with the PRO/Plus/Max versions.

 

-- Manufacturer's Description --

  • 【RSG Leveling System】 Neptune 3 is equipped with a one-button leveling function, using a 16-point RSG leveling system with a strain gauge pressure sensor to adjust the print level more precisely, and the leveling process is simpler and faster. Neptune 3 has a built-in ultra-quiet motherboard, the XY axis uses TMC2225 silent driver, and the E0 axis T uses MC2209 silent driver, which makes the printing sound lower than 50DBA and brings you a good printing experience.
  • 【PEI Magnetic Platform】 Neptune 3 is equipped with a PEI spring steel magnetic platform with a special layer to remove the model without the need for a spatula. The 250W hotbed can be heated to 100°C in a few minutes. The printing speed is increased to 30-180mm/s. The print volume is 0x220x280mm.
  • 【Advanced Extruder Technology】 The spring elastic adjustment function in the double gear extruder is matched with the titanium alloy throat to avoid uneven output and reduce the risk of material blockage. The V-shaped guide roller uses imported POM material, and the printing process is smoother. An intelligent cooling system is used, which automatically shuts down when the temperature is less than 50°. The cooling fans on both sides speed up the process of cooling.
  • 【Resume Printing Function】 A filament sensor is used, which automatically stops printing when the filament is exhausted or blocked, and resumes printing when the filament is loaded. Equipped with 400W famous brand power supply, it has the functions of short circuit protection, overload protection and overvoltage protection to ensure long-term stable printing.
  • 【Solid Frame Design】 The sturdy frame with portable handle and elevated gantry makes the printing process more stable. 4.3inch detachable full-color touch screen can be operated by hand or fixed on the machine, making the operation simpler and more efficient. 8 languages are supported.